Telephone: 204 474 8961
Email Address: ieeq@umanitoba.ca
Website: http://umanitoba.ca/engineering/ieeq

Introduction

The Price Faculty of Engineering offers the IEEQ Program, designed for international engineering graduates (IEGs) pursuing foreign credentials recognition with Engineers Geoscientists Manitoba, the regulatory body for engineering in Manitoba. Through the IEEQ Program, IEGs:

• Meet requirements for academic qualification with Engineers Geoscientists Manitoba and, upon successful completion of IEEQ Program requirements, become registered with Engineers Geoscientists Manitoba as Engineering Intern; and,
• May earn a Post-Baccalaureate Diploma in Engineering from the University of Manitoba.

The provisions of Academic Regulations apply to all students. In addition, the IEEQ Program has regulations and requirements that apply specifically to its students that may differ from the faculty academic regulations.  Details on regulations and requirements not included below are provided to students upon their admission into the IEEQ Program.

Admission Requirements and Application Procedures

The IEEQ Program can accept applicants whose Confirmatory Exam assignments by Engineers Geoscientists Manitoba correspond to one of the five accredited undergraduate engineering programs offered in the Price Faculty of Engineering.

Program entrance is in September of any given year.  In order to be admitted to the IEEQ Program, the student must:

• Be an IEG with an earned undergraduate engineering degree obtained from a university outside of Canada;
• Have obtained the results of an Assessment of Academic Credentials from Engineers Geoscientists Manitoba, with a result of five or fewer Confirmatory Exams assigned by Engineers Geoscientists Manitoba in order to be considered academically qualified;
• Be a Permanent Resident or Canadian Citizen; and,
• Demonstrate proficiency in the English language by meeting the minimum standard in one of the University of Manitoba approved proficiency tests or achieve Canadian Language Benchmark (CLB) Placement Test scores of level eight (8) and no more than one seven (7) in the four language areas (for example, 8/8/8/7 or similar combination).

Degree Requirements

Program Requirements

The Post-Baccalaureate Diploma in Engineering consists of a minimum of 24 hours of coursework, subject to the following regulations:

Course List

Course	Title	Hours
ENG 3000	Engineering Economics	3
ENG 4020	Professional Engineering Practice in Manitoba	4
ENG 4800	Co-operative Work 1	1
Select 16 credit hours in Technical Courses 1		16
Total Hours		24

1	Technical courses are taken from the 3000 and 4000 levels of the student’s engineering discipline, corresponding to the topic areas of Confirmatory Exams assigned by Engineers Geoscientists Manitoba.

The total number of courses required in the IEEQ Program is generally as shown in the table below:

IEEQ Exams

Number of Technical Confirmatory Exams1 Assigned by EGM	Number of Courses in IEEQ2
One (1) or two (2)	5
Three (3)	7
Four (4)	9
Five (5)	11

1	Technical exams refer to exams assigned from Group A or Group B of the Discipline Examinations please refer to engineerscanada. Technical Exams do not include exams assigned from the Basic Studies (BS) or Complementary Studies (CS) syllabi, such as 11-CS-1 Engineering Economics.
2	Including ENG 3000, ENG 4020, and ENG 4800.

If the courses required in the IEEQ Program total less than 24 credit hours, the student may apply for a transfer of credit from the original earned undergraduate engineering degree (obtained outside of Canada).

All courses must be completed with a grade of C or better. Failed courses may only be repeated once, and are subject to the limits outlined in the IEEQ Student Handbook and on the IEEQ Program website.

Maximum Time Limits

Students can choose a full-time or part-time option in the IEEQ Program. Students will be asked to declare their status upon their acceptance to the IEEQ Program.

Maximum Time Limits

Number of Courses in IEEQ	Full-time	Part-time
Seven (7) or fewer	1 yrs	2 yrs
More than seven (7)	2 yrs	3 yrs

Approved Program Variations

While it is the expectation that students will complete their individual programs, it is recognized that, in certain limited circumstances, course substitutions approved by the Price Faculty of Engineering may be made where the content of alternative course(s) have been deemed to be equivalent.

Students are required to consult with their corresponding program advisors and declare their intention of taking the alternate course(s).  The calculations of TGPAs must include the alternate course(s), and they cannot be excluded from the calculation of the TGPAs.

The following is a list of approved substitutions:

1. The combination of STAT 1000 and STAT 2000 is considered equivalent to STAT 2220.

Faculty Academic Regulations

Admission to the Price Faculty of Engineering

The following is a summary of the admission requirements. Equivalent academic courses completed at recognized universities elsewhere will be considered. All admission requirements, as well as application deadline dates and forms, are included in an applicant information bulletin that is available from the Admissions Office, Enrolment Services, 424 University Centre; this information is also posted on the university’s website.

Direct Admission into the Price Faculty of Engineering from High School

Applicants may apply directly to the Preliminary Engineering Program from a Manitoba high school (or the equivalent) and must meet the General Entrance and Specific Admission Requirements for the Price Faculty of Engineering.  The General Admission Requirement is a Manitoba (or equivalent) high school graduation.  The Specific Admission Requirements is a minimum 80% average over the following four subjects, with no less than 70% in each course: Chemistry 40S, Precalculus Mathematics 40S, Physics 40S, and English 40S.  In cases where the number of eligible applicants exceeds the available spaces, applicants will require higher averages than stipulated to be successful in the admissions competition.

Please see the website for more detailed information.

All Other Admissions

A minimum of 8 of the 12 courses in the Preliminary Engineering Program, each with a minimum grade of “C”, and a minimum Adjusted Grade Point Average (AGPA) of 2.0. In addition, if the total number of credit hours attempted by the student in all courses that apply in the Price Faculty of Engineering meets or exceeds 72, then the ratio of those credit hours passed (from all courses with a grade of “C” or better that are applicable to the student’s potential Engineering program) to total credit hours attempted must be greater than or equal to 75%.  Furthermore, if the student has attempted less than 72 credit hours, the total number of failed credit hours (from all courses with a grade of “D”  or “F” that are applicable to the student’s potential Engineering program) must not exceed 18 credit hours in order to be eligible to be considered for admission.

Acceptance to Engineering programs is competitive. Courses must be completed within ten years of the application date in order to be considered for transfer credit.

English and Mathematics Requirements

All students are required to complete the University written English and mathematics requirement within the first 60 credit hours of their program.  The requirement is described in the chapter General Academic Regulations and Requirements of this Calendar.  In the Engineering programs the mathematics requirement is satisfied by one of MATH 1510 or MATH 1710 (or an equivalent); the written English requirement is satisfied by completing a course selected from the list of approved Written English Courses for Engineering Students listed below.

Note that courses transferred from other institutions are evaluated for content, but are not assessed for the written English requirement unless the student explicitly requests such an assessment.  Therefore, students wishing to transfer a course from another institution which may be considered equivalent to a course on the list of Written English Courses for Engineering Students should request that the transfer be assessed as meeting the written English requirement.  If the assessed course is found not to meet the requirement, the student will be compelled to complete another course from the list.

Written English Courses for Engineering Students

Course List

Course	Title	Hours
ASIA 1420	Asian Civilizations to 1500 (B)	3
ASIA 1430	Asian Civilization from 1500 (B)	3
CATH 1190	Introduction to Catholic Studies	3
ENGL 1200	Representative Literary Works	6
ENGL 1300	Literature since 1900	6
ENGL 1340	Introduction to Literary Analysis	3
ENGL 1400	Thematic Approaches to the Study of Literature	3
GPE 2700	Perspectives on Global Political Economy	3
GRMN 1300	Masterpieces of German Literature in English Translation (C)	3
GRMN 1310	Love in German Culture in English Translation (C)	3
HIST 1XXX	Any 1000 level HIST course 1	3-6
HIST 2XXX	Any 2000 level HIST course 1	3-6
INDG 2020	The Métis in Canada	3
POL 1900	Love, Heroes and Patriotism in Contemporary Poland	3
POL 2600	Polish Culture until 1918	3
POL 2610	Polish Culture 1918 to the Present	3
POLS 1502	Introduction to Political Studies 2	3
RLGN 1322	Introduction to Eastern Religions	3
RLGN 1324	Introduction to Western Religions	3
RLGN 1424	Religion and Sexuality	3
RLGN 1440	Evil in World Religions	3
RLGN 2036	Introduction to Christianity	3
RLGN 2140	Introduction to Judaism	3
RLGN 2160	Hebrew Bible (Tanakh/"Old Testament")	3
RLGN 2170	Introduction to the New Testament	3
RLGN 2222	The Supernatural in Popular Culture	3
RLGN 2590	Religion and Social Issues	3
RUSN 1400	Masterpieces of Russian Literature in Translation	3
RUSN 2280	Russian Culture until 1900	3
RUSN 2290	Russian Culture from 1900 to the Present	3
RUSN 2310	Exploring Russia through Film	3
UKRN 2200	Ukrainian Myth, Rites and Rituals	3
UKRN 2410	Ukrainian Canadian Cultural Experience	3
UKRN 2590	Ukrainian Literature and Film	3
UKRN 2770	Ukrainian Culture until 1900	3
UKRN 2780	Ukrainian Culture from 1900 to the Present	3
UKRN 2820	Holodomor and Holocaust in Ukrainian Literature and Culture	3
WOMN 1500	Introduction to Women's and Gender Studies in the Humanities	3
WOMN 1600	Introduction to Women's and Gender Studies in the Social Sciences	3
WOMN 2560	Women, Science and Technology	3

1	Unallocated credits may not be used
2	This course requires a laboratory

Chemical Engineering at the University of North Dakota

The University of Manitoba has an agreement with the University of North Dakota, Grand Forks, N.D., which allows students to obtain a degree in chemical engineering from the University of North Dakota by taking the Preliminary Engineering program at the University of Manitoba and three years at the University of North Dakota. The chemical engineering program at the University of North Dakota is accredited by the Accreditation Board for Engineering and Technology in the United States and is recognized by Engineers Geoscientists Manitoba (formerly the Association of Professional Engineers and Geoscientists of Manitoba).

Academic Regulations

The provisions of the, General Academic Regulations, and the, University Policies and Procedures, apply to all students. In addition, the Price Faculty of Engineering has regulations and requirements, published below, which apply specifically to its students. Notwithstanding the regulations given in this section, the Faculty Council of Engineering reserves the right to rule on individual cases in exceptional circumstances.

Limited Access (see University Policy and Procedures-Limited Access section 2.5 will not affect registration for the 2022-2023 (including Summer Term 2023).

Appeals

Students who feel that they have received unfair treatment in a course should appeal to the instructor. If the matter is not thereby resolved, it should be raised with the Department Head and subsequently the Associate Dean (Undergraduate Programs).

A student's academic status is based on academic performance.  Students who feel that there are circumstances that have affected their academic performance should write to the Associate Dean (Undergraduate Programs), Chair of the Committee on Standing and Appeals, E1-262 EITC. Information regarding this process is available from the Undergraduate Student Services Office, E1-262 EITC and may be viewed through web site.

Attendance and Approved Leaves

Attendance in Courses

When the number of unexcused absences recorded against a student in the Price Faculty of Engineering in any course exceeds 10 percent of the number of lectures and laboratories for that course the instructor may report the case to the Dean of Engineering. When a student’s attendance or work continues to be unsatisfactory, the instructor has the authority to exclude the student from classes, or examinations, or both. Such cases shall be reported to the Faculty Council of Engineering at the first opportunity. Students who are excluded from an examination for inadequate attendance in a compulsory course will receive a failing grade and be required to repeat the course.

Leaves of Absence

Students may make a written request to the Associate Dean (Undergraduate Programs) for a Leave of Absence from their studies when significant circumstances (i.e. medical or compassionate) affect their ability to continue in their program. Should it be approved, the student will be notified in writing of the duration of the leave. The limit on a student's time to complete their Engineering program, as set out in Requirements for the Bachelor's Degree, will be extended by the duration of the approved Leave of Absence.

For situations affecting a student's ability to complete courses already in progress, see Withdrawal from Courses.

Notwithstanding a Leave of Absence, student may choose not to register for courses in any term at their own discretion. However, doing so will not extend a student's time to completion as set out in Requirements for the Bachelor's Degree..

Categories of Students

A student shall normally register for three to six courses in a term.  Registration for more than six or fewer than three courses in a term must be approved by the Department Head or, in the preliminary program, by the Associate Dean (Undergraduate Programs).  Students must also receive approval for registration in courses that are not part of the regular degree program.

All undergraduate programs offered by the Price Faculty of Engineering are full-time programs. Engineering considers registration in 15 credit hours per term to be a full course load. Full-time status is defined as being registered in at least 60 percent of this load, or 9 credit hours per term. Scholarships and other awards may require registration in more than this minimum.

Complementary Studies Electives

Complementary studies electives are an integral part of the curriculum. Their purpose is to broaden the student’s experience beyond the purely scientific and technical content of engineering. They include studies in engineering economics and the impact of technology on society, as well as the central issues, methodologies and thought processes characteristic of the humanities and social sciences. Opportunities for development of the student’s oral and written communication skills are also provided. The complementary studies elective requirements may vary from one program to another.  Course numbers beginning with a 0 (i.e. ENGL 0930) are not allowed as complementary studies electives and ARTS 1110 cannot not be used for credit in the Price Faculty of Engineering.

Procedure Regarding the Inclusion of Elective Courses Taken Towards a Student's Degree Requirements

Upon Admission Into Engineering

At the time of admission, students may choose to apply (transfer) some or all eligible non-Engineering elective courses (i.e., complementary studies electives, science electives, free electives) taken prior to their admission to the Faculty towards their current Engineering degree program. All attempts for those selected courses shall be applied to the student’s degree program and included in the calculation of Degree Grade Point Average (DGPA).

After Admission Into Engineering

Grades for all eligible courses (i.e., technical electives, complementary studies electives, science electives, free electives) attempted following admission to Engineering shall be included in and applied to a student's current degree program.

Special cases for either circumstance may be considered at the discretion of the Price Faculty of Engineering Associate Dean (Undergraduate Programs).

Course Selection

When arranging a program of study, a student must satisfy the following requirements:

1. All prerequisite and corequisite course requirements must be met.
2. All previously failed compulsory courses must be repeated. Students repeating a course previously taken are subject to Limited Access.  Limited Access information may be viewed on the Registrar's Office web site.
3. Students are not normally allowed to repeat courses graded “C” or higher, except under special circumstances with the approval of the Department Head, or for students in the Preliminary Engineering Program, of the Associate Dean (Undergraduate Programs).
4. Failed elective courses may be repeated or replaced with alternative elective courses, however, all attempts will be included in the degree grade point average calculation.

Prerequisite Course: A prerequisite course must have been completed with a “C” grade or better before a subsequent course can be attempted. Under exceptional circumstances, a course instructor may waive, subject to approval by the Department Head (or designate), a prerequisite requirement.

Corequisite Course: A corequisite course must be taken concurrently or before its companion course. Under exceptional circumstances, a course instructor may waive, subject to approval by the Department Head (or designate), a corequisite requirement.

Examinations

Deferred Examinations

If you miss a final examination for medical or compassionate reasons, you may be granted a deferred examination.  Applications for a deferred examination after the examination has been missed must be filed within 48 hours of the date of the missed examination.  A medical certificate or other appropriate documentation may be required.

(Please refer to the General Academic Regulations-Deferred Examinations for more information)

Deferred Examinations are normally scheduled to take place within 30 working days from the end of the examination series from which the examination was deferred. The date of the deferred examination for a particular course will be set by the Dean’s Office no later than January 15, May 15 or Sept 15 and in consultation with the instructor.

Supplemental Examinations

A student who has attempted to meet all requirements for the degree and has a single failure in their final academic year, in an Engineering course, may apply for a supplemental examination in that course. Supplemental examinations may not be requested for any other reason. A student shall only be permitted to exercise the privilege of writing a supplemental examination once in their degree program.

The grade for a course in which a supplemental examination is written shall be calculated in the following manner, with the grade reported being the greater of these two calculations:

1. The supplemental examination shall have the same percentage weighting as the original examination, and shall be combined with all term marks;
2. The supplemental examination shall have the percentage weighting equal to the combined weight of the original examination and all term tests, and shall be combined with all other term marks.

Both the original course grade and the supplemental examination course grade are retained on the student's record, and both are used in the calculation of TGPA and DGPA.

In the event that the supplemental examination is not successfully passed, the course must be repeated again in a subsequent term.

The results of supplemental examinations must be reported to the Faculty Council of Engineering.  The supplemental examination privileges apply only to courses offered by the Price Faculty of Engineering.

Challenge for Credit

Courses offered in Engineering may not be challenged for credit.

Grading and Assessment

All grades awarded by instructors for undergraduate courses offered in the Price Faculty of Engineering are reviewed by examiners’ boards, which comprise all of the instructors in the student’s program year. After approval by department councils, grades are presented to the Faculty Council of Engineering for acceptance.  Grades are published subsequent to their approval by the Faculty Council of Engineering.

Following are the descriptions of grade point averages used for evaluation at end of each of the terms (Fall, Winter, and Summer):

Term Grade Point Average (TGPA)

The Term Grade Point Average (TGPA) is computed from all of the final grades in all undergraduate courses completed during a given academic term.

Degree Grade Point Average (DGPA)

The Degree Grade Point Average (DGPA) is computed from the final grades obtained in all courses attempted, including applicable courses transferred from other faculties and other institutions, as part of a student’s current degree program.  Where a course has been repeated or replaced by an approved substitution or equivalent course, all attempts shall be included in the computation.

Cumulative Grade Point Average (CGPA)

The Cumulative Grade Point Average (CGPA) is computed from the final grades in all undergraduate courses attempted at the University of Manitoba and courses transferred from other faculties and other institutions.

Dean’s Honour List

A continuing student who achieves a Term Grade Point Average (TGPA) of 3.50 or higher in their most recent academic term will be placed on the Dean’s Honour List. The assessment is based on a minimum of 12 credit hours completed in that term. In addition, a graduating student who achieves a Degree Grade Point Average (DGPA) of 3.5 or higher in their final academic evaluation will graduate on the Dean’s Honour List and receive a notation indicating this on their final term transcript.

Awards

A number of scholarships, bursaries and other academic awards are available to Engineering students. For information concerning awards (prizes, scholarships, and bursaries), please visit the Faculty web site. 

Minors in Engineering

In meeting the specific requirements for any minors available to Engineering students, no more than 50% of the credit hours required for a minor may be common with those forming part of a student's regular Engineering program. Normal pre-requisites and class size restriction apply to courses taken towards minors.

Arts Minor

A Minor in Arts is available to Engineering students. The minor consists of 18 credit hours of Arts courses, including a minimum of 6 credit hours in the Humanities and 6 credit hours in the Social Sciences; students must meet all pre-requisite requirements and all courses must be at the 1000 level or higher. ARTS 1110 may not be included in the minor. Depending on the approval of the Engineering department, courses used for the minor may also be used to fulfill program  requirements in Engineering.

Computer Science Minor

A Minor in Computer Science is available to Engineering students. The minimum requirement is 18 credit hours of computer science courses subject to the following constraints:

1. Courses COMP 1012, COMP 1020, and COMP 2140 are compulsory;
2. Nine (9) additional credit hours of COMP courses at the 2000 level or above; and
3. registration in computer science courses will be controlled by normal pre-requisites and class size restrictions.

Geological Sciences Minor

The Minor in Geological Sciences includes the following set of courses: 

1. GEOL 1340;
2. One of the following three courses: GEOL 1400, GEOL 1410 or GEOL 1420;
3. Twelve (12) credit hours of 2000-level or above courses in Geological Sciences

Management Minor

The Minor in Management offered by the Faculty of Management is available to Engineering students. The minor consists of any 18 credit hours of Management courses; students must meet all prerequisite requirements. Depending on the approval of the Engineering department, courses used for the minor may also be used to fulfill program requirements in Engineering. Admission requirements for the minor are based on all courses transferred to Engineering or completed while in Engineering; the requirements are a minimum of 30 credit hours applied to their degrees with a minimum Degree Grade Point Average (DGPA) of 3.00. Up to 10 spaces are available each year for engineering students on a competitive basis. Applications can be made in the Engineering Dean’s office by May 30th.  Students not granted a reserve space in the minor, but who have successfully completed 18 credit hours of Management courses at the time of graduation, will qualify for the Management Minor.

Notes:

1. Civil Engineering students only may use CIVL 2780 for credit towards the Management Minor in Engineering.
2. Mechanical Engineering students only may use MECH 3170 for credit towards the Management Minor in Engineering.

Mathematics Minor

A Minor in Mathematics is available to Engineering students. The minimum requirement is 24 credit hours of mathematics courses subject to the following constraints:

1. the students must notify their home department that they are pursuing the minor;
2. up to 12 credit hours of mathematics courses in a student’s engineering program may be counted toward the minor;
3. the student must complete at least 6 credit hours of courses from the mathematics department at the 3000 level or higher that are not included as part of the curriculum in the student’s engineering program; and
4. approval of the Department of Mathematics is required for courses outside of the regular engineering program.

Music Minor

The Minor in Music requires 18 credit hours of MUSC courses and students are subject to the regulations set by the Marcel A. Desautels Faculty of Music.  Please see Music Minors for students in the Price Faculty of Engineering, Faculty of Arts and Faculty of Science under the Marcel A. Desautels Faculty of Music.

Recreational Studies Minor

The Minor in Recreational Studies requires 18 credit hours of approved coursework.  Students are subject to the regulations set by the Faculty of Kinesiology and Recreational Management. Please see Minor in Recreational Studies under Faculty of Kinesiology and Recreational Management.

Professional Registration

In order to practice engineering in any province or territory in Canada, it is necessary to be a member of the professional engineering association of that province or territory. The requirements for membership are acceptable academic preparation and a subsequent period of acceptable engineering experience gained under the supervision of a registered professional engineer. The undergraduate programs in Biosystems, Civil, Computer, Electrical, and Mechanical Engineering are accredited by the Canadian Engineering Accreditation Board (CEAB), reflecting acceptable academic preparation for membership in the association of professional engineers in any province or territory in Canada. Through a mutual recognition agreement, these programs are also recognized as satisfying accreditation requirements in many other countries such as the United States, the United Kingdom, Ireland, New Zealand, Australia, and Hong Kong.

Graduates of an accredited program are eligible to apply for membership as an engineering intern, in the association of professional engineers in their province of residence in Canada. After a period of acceptable experience, they are eligible to apply to the association for registration as a professional engineer in that province.

Requirements for the Bachelor’s Degree

The requirement for a Bachelor of Science degree in Engineering is a grade of “C” or better in all courses in the student’s program. All students are governed by the rules in effect at the time of their first registration in Engineering.

A student must complete at least 50 per cent of an engineering degree program as a full-time student in the Price Faculty of Engineering. Unless otherwise approved by the Dean of Engineering, students must complete all degree requirements within seven calendar years after being accepted into an Engineering departmental program.

Degree with Distinction

A student who on graduation achieves a Degree Grade Point Average (DGPA) of 3.80 or higher is awarded the degree “With Distinction.”

Criteria for Medal Awards

The Price Faculty of Engineering Program Medal shall be awarded to the graduating student in each engineering program who has achieved the highest Degree Grade Point Average (DGPA) (minimum of 3.80) with no distinction as to full- or part-time status. The Program Medal will be awarded at spring convocation to the student who has completed that program in the past academic year (including October and February graduands).

The University Gold Medal for the Price Faculty of Engineering shall be awarded to the graduating student in the Price Faculty of Engineering who has achieved the highest Degree Grade Point Average (DPGA) (minimum of 3.80) for the entire program with no distinction as to full- or part-time status.

Student Progress and Academic Status

Students shall be evaluated at the conclusion of each academic term in which they receive a final grade in a minimum of 6 credit hours of course material (excluding Special Student credit hours), with the assessment being based on the resulting Term Grade Point Average (TGPA) in those courses.  This assessment shall be based on only those courses which form part of the student's Engineering Program.  The academic assessments are as follows:

Good Academic Standing

A student with a TGPA of 2.00 or higher is in Good Academic Standing. This will be notated as “Faculty Minimum Met” or “Satisfactory” on the student academic transcript.

Academic Warning

The first time the student’s TGPA drops below 2.00, he/she will receive an Academic Warning. Students who receive such a warning are required to meet with an academic advisor from their department or, in the Preliminary Engineering Program, from the Dean's Office.

Academic Probation

The second time that a student’s TGPA drops below 2.00, the student will be placed on Academic Probation.

Required to Withdraw

The third time that a student’s TGPA drops below 2.00, the student will be Required to Withdraw. Students who receive such a suspension shall be ineligible to take courses offered by the Price Faculty of Engineering from the end of the term for which the suspension was issued through to the start of that same term in the subsequent academic year (normally, a period of 8 months.)

In order to be reinstated following the suspension period, the student must submit a written request for reinstatement to the Associate Dean (Undergraduate Programs). Applications must be received between 30-60 days in advance of the effective date of reinstatement; requests made earlier than 60 days in advance will not be accepted.

Ineligible to Proceed in Engineering

A student shall be Ineligible to Proceed in Engineering under either of the following conditions:

1. The student’s TGPA drops below 2.00 for a fourth time, or;
2. The ratio of credit hours passed (from all courses with a grade of "C" or better that are applicable to the student's Engineering program) to total credit hours attempted for that student drops below 75%, and the student has attempted a minimum of 72 credit hours.

Starting Afresh

Students who have become Ineligible to Proceed in Engineering may apply to the Dean for permission to start their degree afresh, should they wish to return to the Price Faculty of Engineering.

At the discretion of the Dean, a student may start afresh in an engineering program after a minimum period of two years from their last academic assessment by the Price Faculty of Engineering, and may request to transfer up to 40 credit hours in which a minimum grade of “C+” was achieved. All previous courses will remain on the student’s academic transcript, but will not be applied to their new program.

Limit on Time in the Preliminary Engineering Program

Students admitted to the Preliminary Engineering Program shall have two years to complete the minimum course requirements and submit an application for possible acceptance into an Engineering program.  In the case of students admitted to the program through the Engineering Access Program the limit shall be three years.

Students who fail to meet this criterion shall be required to withdraw from Engineering.  Such students may subsequently apply to an engineering program after successfully completing all courses forming the Preliminary Engineering Program.

Students Applying to an Engineering Program

Students will be accepted into department programs based on the following criteria. Students who have completed 8-12 Preliminary Engineering Program courses by May 1st of each academic year will be ranked and admitted on a competitive basis based on the average of the best eight marks in courses in the Preliminary Engineering Program.

Students applying from programs, faculties, colleges, or other institutions will have all courses or equivalent courses that are required in a particular engineering program transferred in, including failed grades (“D’s” and “F’s”) in those courses.  In addition, if the total number of credit hours attempted by the student in all courses that apply in the Price Faculty of Engineering meets or exceeds 72, then the ratio of those credit hours passed (from all courses with a grade of “C” or better that are applicable to the student’s potential Engineering program) to total credit hours attempted must be greater than or equal to 75%.  Furthermore, if the student has attempted less than 72 credit hours, the total number of failed credit hours (from all courses with a grade of “D” or “F” that are applicable to the student’s potential Engineering program) must not exceed 18 credit hours in order to be eligible to be considered for admission.  Students are advised to consult with the Engineering Undergraduate Student Affairs Office if there is concern as to their standing under this rule.

Direct entry engineering students must submit an application for admission through the on line process, indicating their program(s) of choice. The application fee for direct entry engineering students applying to an engineering program is waived.  Students from University 1 and other faculties must apply for admission through the on line process as well and will be subject to an application fee.

Use of Calculating Devices

For courses offered by the Price Faculty of Engineering in which the use of devices capable of calculations is permitted in tests or examinations, such devices must be incapable of receiving and/or transmitting signals. Instructors wishing to restrict devices to certain capabilities must inform students, in writing, within the first week of term. Questions concerning the suitability of any given device should be directed to the course instructor(s).

Withdrawal from Courses

The responsibility for initiating withdrawals rests solely with the student, and no voluntary withdrawals are permitted after the deadlines for voluntary withdrawal without academic penalty (please refer to the General Academic Regulations). For documented medical or compassionate reasons, Authorized Withdrawals may be permitted by the Dean's Office, Price Faculty of Engineering.

A student who, after registering for courses, in any term, becomes Ineligible to Proceed in Engineering will be withdrawn from his or her courses for the effective term as well as any subsequent terms, including Summer Session.

Introduction

This chapter contains the regulations and requirements that apply to all students, regardless of faculty or school.

Each faculty and school has its own supplementary regulations and requirements. These are published in the faculty or school chapters of the Academic Calendar. Some faculties and schools also have additional regulations and requirements governing their programs; these are available from the faculty or school.

It is the responsibility of each student to be familiar with the academic regulations and requirements of the University of Manitoba in general and of the specific academic regulations and requirements of their faculty or school of registration. Accordingly, students are asked to seek the advice of advisors in faculty and school general offices whenever there is any question concerning how specific regulations apply to their situations.

Residence and Written English and Mathematics Requirements

Residence Requirements For Graduation

The grade of “D” is regarded as marginal in most courses by all faculties and schools. It contributes to decreasing a term, degree or cumulative Grade Point Average to less than 2.0. Courses graded “D” may be repeated for the purpose of improving a GPA. Note that some faculties and schools consider a grade of “D” as unacceptable and will not apply the course toward the program as credit. In most cases the course will need to be repeated to attain the acceptable grade. Refer to faculty and school regulations.

Calculation of Grade Point Average

The University of Manitoba will report cumulative and term grade point averages for all students through Aurora Student.
Please also refer to the Grade Point Averages Policy found in the University Policies and Procedures..

Quality Points

The quality points for a course are the product of the credit hours for the course and the grade point obtained by the student; e.g., 3 credit hours with a grade of “B” (3.0 points) = 3 credit hours x 3.0 = 9.0 quality points.

Quality Point Total

The quality point total is the sum of quality points accumulated as students proceed through their program of studies.

Grade Point Average (GPA)

The grade point average (GPA) is the quality point total divided by the total number of credit hours.

Example:

Grade Point Average

Course	Credit Hours	Grade	Grade Points	Quality Points
Course 1	3	B	3	9
Course 2	3	B+	3.5	10.5
Course 3	3	C+	2.5	7.5
Course 4	3	B	3	9
Course 5	3	A	4	12
Totals	15			48

Grade point average: 240 Quality Points / 15 Credit Hours = 3.20

Poor Grades and Program Progression

A course in which a “D” standing is obtained may need to be repeated by probationary students in certain faculties or where a minimum grade of “C” is required in a prerequisite subject or to meet degree requirements.

Students in doubt as to the status of their record should consult an advisor in their faculty or school.

For minimum grade levels, especially as they affect progression requirements, see the faculty or school regulations in the Academic Calendar or consult an advisor.

Academic Honours

Students qualify for the Honour List (Dean’s, Director’s, University 1) when they achieve qualifying grade point averages, as specified by the faculty/school or program regulations.

In addition, outstanding academic achievement will qualify students for other honours and awards.  These include:

• the University Gold Medal, which is awarded at graduation in each faculty or school to the student with the most outstanding academic record;
• program medals, which are awarded by faculties and schools to the best student graduating from a specific program;
• graduation “with distinction”, which is recorded on the transcripts of all students who attain a qualifying grade point average;
• and other medals and prizes that are specific to programs or disciplines.

Academic Evaluation

Methods of Evaluation

Students shall be informed of the method of evaluation to be used in each course, as specified in the Responsibilities of Academic Staff with Regard to Students Policy, found in the University Policies and Procedures.

In departments where a course is offered in more than one section, the department offering the course endeavours to provide instruction so that all sections cover similar topics and that all students achieve a similar level of competency in the topic. However, there will be differences in evaluation as well as in teaching style, readings and assignments from one section to another. Students may contact the department for additional information before registration.

Credit for Term Work